New Type Rotary Shear And Trimming Integrated Machine

GENERAL INTRODUCTION TO EQUIPMENT This machine is required to realize high efficiency and high yield for the corrugated cardboard. Its main functions are: 1. Cut off waste boards and papers prior to order change, which can provide guarantee for non-stop order changing. 2. It can realize the non-cutoff order change for double layer production line. 3. It will cut the wastes and stop when there is machine malfunction.

Electric and Pneumatic Parts

Cutoff control: British CT AC servo controller or LENZE servo controller

Operation monitoring: Schneider touch screen

Monitoring control: Schneider PLC or LENZE PLC, PEPPERL FUCHS

proximity switch, optoelectronic switch, SICK encoder

Low voltage apparatus: Schneider

FUNCTIONAL FEATURES

Extremely Fast

The equipment adopts cutting anvil roller,which uses separate driving structure for the lower and upper motors to enable the load of the motors to be reduced by half compared with non-separate driving structure.

The blade roller could be synchronized with production line instantaneously. It is necessary when the order is changed without slowing down or malfunction cutoff. The speed of cutting waste could be 220m/m. (The speed of production line is 250m at extremity).

Long Service Life

The upper and lower knife roller are driven by servo motor separately. Due to different diameter of the anvil roller and knife roller, each cutting position will be evenly distributed on anvil roller.

Comparing with the structure of one motor driving (cutting the same position), the anvil roller could serve much longer service life, which will be more than 6 million times.

Arrangeable Multi-blade System

The entire blade roller is made by many groups of blades in sequence and each could be controlled for ascent or descent independently. It can connect with the production management system to control the positions where to cut or not during the boards cutting. So it can carry out the function of order changing without cutting off the boards and do the edge cutting for double layer production line.

Fast and Smooth Waste Discharge

The upper and lower belts are powered to discharging the boards without blocking.

TECHNICAL PARAMETERS

Product Model	NCQD-2200-300	NCQD-2500-300	NCQD-2800-300
Dimension	3507×4985×1998mm	3507×5285×1998mm	3507×5585×1998mm
Max. Slitting Width	2290mm	2590mm	2890mm
Total Power of Motor	40KW	40KW	40KW
Line Speed	300m/min	300m/min	300m/min

Hot Tags: new type rotary shear and trimming integrated machine, China, suppliers, manufacturers, factory, made in China